Get complete, unparaphrased NCERT Solutions for Class 9 Science Chapter 6: How Forces Affect Motion. Directly extracted from the official NCERT textbook (Exploration, Pages 112–115), all 16 exercises under “Revise, Reflect, Refine” are solved in the authentic Topper’s Handwritten Notebook Style with step-by-step Newton’s Laws applications and zero raw formatting errors.
Class 9 Science — Chapter 6: How Forces Affect Motion
Official NCERT Textbook: Exploration • Section: Revise, Reflect, Refine (Pages 112–115)
According to Newton’s First Law of Motion, when an object moves with a constant velocity, its acceleration is zero (a = 0). Therefore, the net horizontal force acting on the table must be zero (Fnet = 0).
Applied forward force − Opposing frictional force = 0
F − ffriction = 0 ⇒ ffriction = F.
(i) If no net force is applied on the ball, the velocity of the ball will remain the same / increase / decrease.
(ii) If a net force is applied on the ball in the direction of its motion, the magnitude of the velocity of the ball will remain the same / increase / decrease.
(iii) If a net force is applied on the ball in a direction opposite to the direction of its motion, the magnitude of the velocity of the ball will remain the same / increase / decrease.
(i) If no net force acts: velocity will remain the same (Inertia of motion).
(ii) If net force acts in direction of motion: velocity will increase (Positive acceleration).
(iii) If net force acts opposite to motion: velocity will decrease (Deceleration/retardation).
(i) P experiences a net force and Q does not experience a net force.
(ii) P does not experience a net force and Q experiences a net force.
(iii) Both P and Q experience a net force.
(iv) Neither P nor Q experiences a net force.
• Block P: Opposite forces of 5 N and 4 N act on it → Fnet = 5 N − 4 N = 1 N ≠ 0 (Experiences a non-zero net force).
• Block Q: Moves with a constant velocity → Acceleration a = 0 → Net force Fnet = 0 (Does not experience a net force).
Forward propulsive oarsmen = 95
Opposing oarsmen = 5
Effective net forward oarsmen = 95 − 5 = 90 oarsmen
Force exerted per oarsman = 200 N
Net force (Fnet) = 90 × 200 N = 18,000 N in the forward direction
(i) opposite to the direction of force, with acceleration proportional to the force acting on the object.
(ii) opposite to the direction of force, with acceleration proportional to the mass of the object.
(iii) in the direction of force, with acceleration inversely proportional to the force acting on the object.
(iv) in the direction of force, with acceleration proportional to the force acting on the object.
Newton’s second law of motion states that the acceleration produced in an object is directly proportional to the applied net force, inversely proportional to its mass, and occurs in the direction of the net force (a = F / m).
By Newton’s First and Second Laws:
Net Force ≠ 0 ⇔ Acceleration ≠ 0 ⇔ Velocity is changing with time.
On an s-t graph, the slope represents velocity. Straight-line graphs (constant slope) represent uniform zero-acceleration motion. A curved position-time graph represents non-uniform accelerated motion where slope changes continuously.
In Fig. 6.37, Object C has a distinctly curved parabola, signifying changing velocity and a non-zero net force.
Yes, the boat will move in the backward direction (away from the shore).
Scientific Reason: To propel themselves forward onto the shore, the sailor must push backward against the floor of the boat with their feet (Action force). According to Newton’s Third Law of Motion, for every action there is an equal and opposite reaction: the boat pushes the sailor forward while the backward reaction force exerted by the sailor’s feet drives the unanchored floating boat backward into the water.
When an athlete lands from a high jump, their downward momentum must be brought to zero (Δp = mv − 0).
According to Newton’s Second Law: F = Δp / Δt (Force = Rate of change of momentum).
A soft landing foam mat or sand bed yields and depresses upon impact, significantly increasing the time interval (Δt) required to bring the athlete to rest. Because Δt is much larger, the average impact stopping force (F) exerted on the athlete’s body is drastically reduced, preventing severe fractures and musculoskeletal injuries.
(i) the loaded cart exerts a force of larger magnitude on the empty cart.
(ii) the empty cart exerts a force of larger magnitude on the loaded cart.
(iii) neither cart exerts a force on the other.
(iv) the loaded cart and the empty cart, both exert an equal magnitude of force on each other.
By Newton’s Third Law of Motion, whenever two bodies interact, the force exerted by the first body on the second is always equal in magnitude and opposite in direction to the force exerted by the second body on the first, regardless of the masses or initial velocities of the two colliding bodies.
From Fig. 6.40, reading mass and acceleration coordinates:
– At m = 1 kg, a = 10.0 m s−2 ⇒ F = m × a = 1 × 10 = 10 N.
– At m = 2 kg, a = 5.0 m s−2 ⇒ F = 2 × 5 = 10 N.
– At m = 4 kg, a = 2.5 m s−2 ⇒ F = 4 × 2.5 = 10 N.
The product F = m × a is constant at 10 N for all masses.
The Force-Mass graph is a horizontal straight line parallel to the Mass axis at F = 10 N.
From Fig. 6.41:
Initial velocity at t = 0 s: u = 0 m s−1
Velocity at t = 8 s: v = 20 m s−1
Acceleration (a) = (v − u) / t = (20 − 0) / 8 = 20 / 8 = 2.5 m s−2
Mass of object (m) = 10 kg
Force (F) = m × a = 10 kg × 2.5 m s−2 = 25 N
Mass of bullet (m) = 50 g = 50 / 1000 kg = 0.05 kg
Initial speed (u) = 100 m s−1
Final speed (v) = 0 m s−1 (comes to rest)
Penetration distance (s) = 50 cm = 0.50 m
02 = (100)2 + 2 × a × 0.50
0 = 10000 + 1.0 × a ⇒ a = −10,000 m s−2
F = 0.05 kg × (−10000 m s−2) = −500 N
Initial velocity (u) = 0 m s−1
Final velocity (v) = 108 km h−1 = 108 × (5/18) = 6 × 5 = 30 m s−1
Mass of ball (m) = 0.4 kg
Change in momentum (Δp) = m(v − u) = 0.4 × (30 − 0) = 12 kg m s−1
Force × Time = Δp ⇒ 800 × t = 12
t = 12 / 800 = 3 / 200 = 0.015 s (15 ms)
Total opposing force = Friction force + External opposing force = 7 N + 3 N = 10 N
Mass of object (m) = 2 kg
Deceleration (a) = −F / m = −10 / 2 = −5 m s−2
Initial velocity (u) = 10 m s−1, Final velocity (v) = 0 m s−1
02 = (10)2 + 2 × (−5) × s
0 = 100 − 10s ⇒ 10s = 100 ⇒ s = 10 m
From F = ma:
m1 = F / a1
m2 = F / a2
Combined mass M = m1 + m2 = (F / a1) + (F / a2) = F × [(a1 + a2) / (a1 × a2)]
Resulting acceleration (a) = F / M = F / [F × (a1 + a2) / (a1a2)] = (a1 × a2) / (a1 + a2)
While the interaction forces |Faction| = |Freaction| are exactly equal in magnitude by Newton’s Third Law:
1. Mass and Inertia Difference: Acceleration is inversely proportional to mass (a = F / m). The lightweight magnetic compass needle has an infinitesimally small mass, resulting in a large observable acceleration. The heavy bar magnet has many orders of magnitude larger mass, producing a negligible acceleration.
2. Pivot vs Surface Friction: The needle is poised on an almost frictionless sharp needle-point pivot, so the slightest torque causes it to deflect immediately. The bar magnet rests on a table where the maximum force of static friction far exceeds the tiny magnetic reaction force, preventing any observable displacement.